阿美特克 交流电源 2001RP - 使用说明书
文件名：阿美特克 交流电源 2001RP - 使用说明书
格式：PDF
大小：2.91 MB
页数：131页
本站仅提供预览学习使用，请勿用于商业用途
内容介绍
California Instruments
Model 2001RP
Revision R
October 2009
Copyright 1999–2009
By AMETEK Programmable Power
All rights reserved
P/N 4005-985
AC Power Source
User and Programming Manual
AMETEK PROGRAMMABLE POWER
Tel: +1 (858) 677-9040
Fax: +1 (858) 677-0940
Email: sales@calinst.com
Website: http://calinst.com
User and Programming Manual - Rev R
California Instruments
2001RP AC Power Source
Models:
2001RP
2001RP-AV
2001RP-LZ
Copyright 1999–2009 AMETEK Programmable Power, Rev Q, October 2009
SAFETY SUMMARY
This power source contains high voltage and current circuits that are potentially lethal. Because of its size and weight, electrical and mechanical stability must be ensured. The following safety guidelines must be followed when operating or servicing this equipment. These guidelines are not a substitute for vigilance and common sense. If this power source is not used as specified in this manual, the protection provided by this equipment may be impaired. AMETEK Programmable Power assumes no liability for the customer’s failure to comply with these requirements.
APPLYING POWER AND GROUNDING
Verify the correct voltage is applied to the unit (120 or 230 VAC nominal). Verify that the input power wiring is connected to a properly grounded utility outlet.
FUSES
Use only fuses of the specified current, voltage, and protection speed. Do not short out the fuse holder or use a repaired fuse. The main supply in the 2001RP uses a North American ferrule type fuse (F2) rated at 20A and 250V (fast acting). The low power supplies in the 2001RP use a North American ferrule type fuse (F1) rated at the specified value and 250V.
DO NOT OPERATE IN A VOLATILE ATMOSPHERE
Do not operate the power source in the presence of flammable gases or fumes. This product is designed to operate in a controlled environment. Do not expose to rain or snow.
DO NOT TOUCH ENERGIZED CIRCUITS
Disconnect the power cable before servicing this equipment. Even with the power cable disconnected, high voltage can still exist on some circuits. Discharge these voltages before servicing.
Model 2001RP
Revision R
October 2009
Copyright 1999–2009
By AMETEK Programmable Power
All rights reserved
P/N 4005-985
AC Power Source
User and Programming Manual
AMETEK PROGRAMMABLE POWER
Tel: +1 (858) 677-9040
Fax: +1 (858) 677-0940
Email: sales@calinst.com
Website: http://calinst.com
User and Programming Manual - Rev R
California Instruments
2001RP AC Power Source
Models:
2001RP
2001RP-AV
2001RP-LZ
Copyright 1999–2009 AMETEK Programmable Power, Rev Q, October 2009
SAFETY SUMMARY
This power source contains high voltage and current circuits that are potentially lethal. Because of its size and weight, electrical and mechanical stability must be ensured. The following safety guidelines must be followed when operating or servicing this equipment. These guidelines are not a substitute for vigilance and common sense. If this power source is not used as specified in this manual, the protection provided by this equipment may be impaired. AMETEK Programmable Power assumes no liability for the customer’s failure to comply with these requirements.
APPLYING POWER AND GROUNDING
Verify the correct voltage is applied to the unit (120 or 230 VAC nominal). Verify that the input power wiring is connected to a properly grounded utility outlet.
FUSES
Use only fuses of the specified current, voltage, and protection speed. Do not short out the fuse holder or use a repaired fuse. The main supply in the 2001RP uses a North American ferrule type fuse (F2) rated at 20A and 250V (fast acting). The low power supplies in the 2001RP use a North American ferrule type fuse (F1) rated at the specified value and 250V.
DO NOT OPERATE IN A VOLATILE ATMOSPHERE
Do not operate the power source in the presence of flammable gases or fumes. This product is designed to operate in a controlled environment. Do not expose to rain or snow.
DO NOT TOUCH ENERGIZED CIRCUITS
Disconnect the power cable before servicing this equipment. Even with the power cable disconnected, high voltage can still exist on some circuits. Discharge these voltages before servicing.
预览图片
第1页
第2页
第3页
第4页
第5页
